Installation Instructions
Flashguard LED Flasher Module
To Flashguard XL PLus
PCB
È
È
È
È
1.
Straighten the two LEDs by gently bending them in to
the the upright position.
2.
Fix the board to the cut-out inside the cover using the
self-ashesive pads provided. Screws can be used if
desired.
3.
Connect the unit to a
suitable 12V supply,
observing polarity. The
two LEDs will now
flash alternately.
4.
Fix the unit to the wall
in the same way as an
ordinary simulated unit.
The Installers Choice
Part No. 102325
