On the KD-CLN-LP200 ultrasonic cleaner, locate the hex
screw circled in the left photo. Remove this screw from the
front panel.
Model KD-ATL-RCM05
Automatic Disc Loader Instructions
www.klaudio.com
Carefully place the auto-loader onto the LP cleaner.
Temporarily hold the auto-loader in place to prevent it
from falling off.
While holding the auto-loader, secure it with the included
thumb screw.
Push the screw through the opening of the auto-loader
and into the absent hex screw location in the front panel.
Gently tighten by hand.
Connect the included cable from
the “AUX. POWER” plug on the
rear of the LP cleaner to the auto-
loader’s side plug.
Installation
