17
Slide the remote controller receiver
unit into the slot on the mounting
bracket.
5
Wire-in the remote controller receiverunit as shown in the figure below. Terminal
block on the mounting bracket must be used between the receiver output wire
and the motor wires. Terminal block provided separately along with the remote
controller pack must be use to connect between the supply wire.
6
To fan
Canopy
Remote receiver
Power supply
Brown
Blue
Yellow
Power supply live-wire
Power supply neutral-wire
Ground wire
Red
Brown
Orange
To motor
wire
Black wire
Antenna wire
Temp. wire
Temp. wire
Canopy
Hole for temperature
sensor