Klarstein Zap Dry, Manual, Page: 14 / 42

14
EN
2. When the power plug is plugged into the outlet, the unit will perform a self-test and
all indicator lights will flash. After the self-test, the device will automatically switch to
standby mode.
3. Press the switch button to start. The factory default function is "underwear baby
clothes." At this time, the display window will display "1:30" for two seconds. The
unit will start to warm up, the "underwear baby clothes" indicator will flash and
the time display will start to count down. As soon as the countdown has ended, the
device will switch off automatically. The cooling fan should then continue to run for
a minute to release the excess heat.
4. The preset drying times are: "towel coat" 3 hours; "underwear baby clothes" 1 hour
30 minutes; "additional drying time" 30 minutes. The drying time of each program
can be adjusted according to individual needs. Each time the TIMER button is
pressed, the drying time is adjusted. Each press of this button increases the drying
time by 10 minutes. A maximum of 5 hours can be set. If you try to set more than 5
hours, the timer will automatically start again at 10 minutes.
5. You can choose from the following 3 programs
• "Towel coat" for drying cotton or thick fabric
• "Underwear baby clothes" drying of soft fabric;
• "Additional drying time".
6. Aroma function: drop one or two drops of fragrance on the sponge and place the
sponge in the aroma container. Close the cover. During the drying process, the
fragrance will be released into the laundry drum and the clothes will absorb the
scent.