18
EN
COMMISSIONING AND OPERATION
Start-up
• Pull the unit outwards from the carton and place it on a solid hot-proof horizontal
surface.
• Check if the accessories are complete (air cooler, instruction manual, remote
control).
Add water (see figure 1)
1. Push against the top in the handle of the water tank (1).
2. Pull out the water tank (2).
3. Loosen the clasps on both sides of the cover of the water tank (3).
4. Remove the cover of the water tank (4).
5. Fill water into the water tank (up to the MAX mark).
6. Replace the water tank cover and close the clasps on both sides of the water tank
cover. Slide the water tank back into the appliance.
Figure 1
