14
EN
Components
Designation
Stk.
Motor
1
Lower bar
2
Telescopic rod
2
Hanger
1
Clamps
4
Clamps with elastic cord
4
Shirt airbag
1
Trouser airbag
1
ASSEMBLY
1
1.
Pull the mains plug out of the back of motor unit.
Drying Shirts
2
Install the two lower rods into the corresponding holes of the motor unit. Insert
the two telescopic rods with lower rods. Set the height you want. To do this,
open the screw, pull out the telescopic rod and then close the screw again.
Place the hanger with 4 clips onto the telescopic rods.
3
Put on the shirts air bag, and pull the elastic cord at the bottom over the
mounting flange.
