38
EN
INSTALLATION
Cut out the work surface according to the sizes shown in the table and the drawing.
For the purpose of installation and use, a minimum of 50 mm space shall be preserved
around the hole. Be sure the thickness of the work surface is at least 30 mm. Please
select heat-resistant work surface material to avoid larger deformation caused by the
heat radiation from the hotplate.
Dimensions
(mm)
L
W
H
D
A
B
X
10030683
288
520
52
48
265+5
495+5
min. 50
10034193
590
520
56
52
555+5
495+5
min. 50
10034194
10036334
450
520
52
48
430+5
495+5
min. 50
Installation of the foam gasket
Do not install the hob without the foam gasket. The gasket should be fitted to the hob as
follows:
•
Remove the protective film from the gasket.
• Then attach the gasket to the bottom of the glass next to the edge.
•
The gasket must be fitted along the entire length of the edge of the glass and must
not overlap at the corners.
•
When fitting the gasket, ensure that the glass does not come into contact with sharp
objects.
Gasket