13
EN
• After plugging the appliance, allow the unit to cool down for 2-3 hours before
placing beverage into the refrigerator compartment.
• Ventilation is very important for this kind thermoelectric refrigerator; The inside
PCB will be broken easily if the ventilation is bad; It will also reduce the life of the
refrigerator.
• The refrigerator applies automatic defrosting system, so there is no need to defrost it
manually.
TROUBLESHOOTING
Problem
Possible cause
Solution
Appliance does not work.
Mains plug is not plugged
in or is loose
Insert mains plug.
Fuse has blown or is
defective
Check fuse, replace if
necessary.
The food is too warm.
Temperature is not properly
adjusted.
Please look in the initial
Temperature Setting
section.
Door was open for an
extended period.
Open the door only as
long as necessary.
A large quantity of warm
food was placed in the
appliance within the last
24 hours.
Turn the temperature
regulation to a colder
setting temporarily.
The appliance is near a
heat source.
Please look in the
installation location section.
Appliance cools too much. Temperature is set too cold. Turn the temperature
regulation knob to a
warmer setting temporarily.
Unusual noises.
Appliance is not level.
Re-adjust the feet.
The appliance is touching
the wall or other objects.
Move the appliance
slightly.
A component, e.g. a
pipe, on the rear of the
appliance is touching
another part of the
appliance or the wall.
If necessary, carefully bend
the component out of the
way.