29
EN
WIFI
When switched on, press and hold the MODE/WIFI button
for 5 seconds. After a beep sounds, the WiFi indicator flashes
quickly after approx. 5 seconds and the app network can
be configured in standard mode. If the connection is not
established within 3 minutes, the WiFi indicator goes out.
To re-establish the connection, press and hold the MODE/
WIFI button for 5 seconds. After the beep sounds, the WiFi
module is reset, the WiFi indicator flashes quickly after about
5 seconds and the app network can be configured in standard
mode. If the WiFi indicator flashes quickly, press and hold
the MODE/WIFI button again for 5 seconds. After the beep
sounds, the WiFi indicator flashes slowly after about 5 seconds
and the app network can be configured in compatibility mode.
Notes on the WiFi function:
1. If the unit is switched off within 10 seconds after it is
switched on, the WiFi indicator returns to the state
before it was switched off. If the unit is switched off after
10 seconds, the WiFi indicator goes off and changes to
low power mode. You must press and hold the setting
button for 5 seconds to restart.
2.
During the pairing process, if the network is not
configured within 3 minutes, the WiFi indicator goes off.
You must press and hold the setting button for 5 seconds
to restart.
3.
When pairing is complete, the router switches off and the
WiFi indicator goes out. When the router is switched on
again, it is automatically paired and connected.
4.
When using the WiFi function, the WiFi indicator must
flash quickly. A WiFi router (must be able to connect to
the external network) and a mobile end device (e.g.
smartphone) are required to use the Klarstein app. The
Klarstein app must be installed on the mobile end device
that is also connected to the WiFi network.
TIMER
This tower evaporative cooler is equipped with a 7.5 hour
programmable timer. To set the timer, press the TIMER button.
Each press of this button will add 0.5 hours to the set time. The
set time will be indicated in the middle of the display panel.
SWING
To activate the oscillation feature, press the SWING button.
The evaporative cooler’s air louvers will automatically move
from side to side, which increases air circulation and distributes
air more evenly.
