18
EN
SAFETY INSTRUCTIONS
•
Check the voltage specification on the type plate before use. Ensure that you
only connect the appliance to sockets with the appropriate voltage.
• Keep the cable away from hot surfaces and sharp objects.
• Do not lay the cable under a carpet or cover it with other objects or fabrics.
Lay the cable so that no one falls over it or gets caught on it.
• Do not use the device if the plug or the power cord is damaged.
• If the power cord is damaged, it must be replaced by the manufacturer, an
authorised specialist company or a similarly qualified person.
• Use the unit indoors only.
• Do not cover the device.
• Place the appliance on a level, stable surface. Make sure that the device is
upright.
•
Make sure that the unit is switched off before inserting the plug into the
socket.
• Do not operate the appliance with wet hands and do not handle the plug and
the cable with wet hands.
•
Do not leave the device unattended during operation. Switch the device off
and unplug it when you are not using it.
• Unplug the plug from the socket before cleaning the device.
• Do not pull the plug out of the socket by the cable. Instead, hold it securely
with your hand while unplugging it.
• Children over 8 years as well as mentally, sensory and physically impaired
persons may only use the device if they have been informed in detail about
the functions and safety precautions by a supervisor responsible for them
beforehand and understand the associated risks.
• Use the device only as described in these operating instructions.
•
Do not put your fingers or objects into the ventilation openings.
• Do not place the appliance near curtains, drapes, tablecloths or similar
textiles. These could be drawn into the fan and could damage it.
• Do not use the unit in damp rooms such as bathrooms.
• Do not use the unit before the wheels are mounted or when it is lying on its
side.
• Unwind the cable completely before use.
•
During operation, the unit humidifies the ambient air. However, avoid too high
humidity. We recommend a humidity of between 40-50%. Excessive humidity
can lead to mould or health problems.
• Only place the unit on surfaces that are insensitive to moisture and high
humidity. It can always happen that a few drops fall out when installing
or removing the water tank. If this is the case, wipe away the water drops
immediately.
• Change the water in the tank after 3 days at the latest.
