37
EN
TROUBLESHOOTING
Problem
Possible Cause
Solution
The lid is difficult to
close.
The big seal ring (17)
has not been installed
properly.
Make sure that the big
seal ring is properly
seated and held in place
by the metal ring on the
underside of the lid.
The lid is difficult to
open.
The pot is still under
pressure.
Use the Quick Pressure
Release method to
release the pressure
remaining in the pot.
Make sure the float valve
(3) is in the low position
before attempting to
open the lid.
Steam comes out of
the lid.
The big seal ring (17) is
uninstalled.
Install the big seal ring
(17).
The big seal ring (17) is
dirty and therefore does
not seal completely.
Clean the big seal ring
(17).
The lid is unlocked.
Lock the lid.
Steam comes out of the
float valve.
The seal ring of the float
valve (15) is dirty.
Clean the seal ring of
the float valve (15). It is
located around the float
valve on the underside
of the lid.
