Klarstein 10036100, Manual

Page: 22 / 76

22
EN
TEMPERATURE CONTROL
• The interior lighting can be switched on or off by pressing the button.
The light will automatically turn off after 10 minutes if not turned off manually.
If you press the button again, the light is switched on again.
• Pressing the button changes the temperature display from Celsius to
Fahrenheit.
• The device is equipped with an automatic control panel safety device, which
is activated 20 seconds after you have pressed a button. Press the button
for 2 seconds to unlock the control panel. A beep will be heard now to let you
know that the control panel is now active.
• By pressing the buttons or on the control panel, the temperature
can be adjusted. If you want to increase the temperature by one degree, press
the button once. If you want to lower the temperature by one degree,
press the button once.
Note : If you are using the appliance for the first time or the appliance has
been switched off for a long period of time, there may be a difference of a few
degrees between the temperature you have selected and the temperature
displayed on the LED screen. This is absolutely normal and is due to the length
of the activation time. Once the device has been on for a few hours, everything
is back to normal.
Interior lighting
Press the button to switch the interior lighting on or off. The light will
automatically turn off after 10 minutes if not turned off manually. If you then press
the button [X] again, the light is switched on again
Instructions for use
• Position the unit so that the power cord plug is easily accessible at all times.
• Make sure that the device is not exposed to direct sunlight.
• Do not place the unit directly next to a heater.
• Do not place the appliance directly on the floor. Use the feet.
• This appliance is not suitable for freezing food.
• The storage box is not suitable for storing food, otherwise the food may spoil.