28
EN
OPERATION
Switching on
1. After plugging the power cord into the wall outlet, press the button
to
switch the device from standby mode to operating mode.
2. The factory default setting is fan speed 1 in normal mode.
Fan speed
•
The unit has 4 different speed settings.
• While the unit is on, press the
SPEED
button to adjust the fan speed. Each time
the
SPEED
button is pressed, the fan speed is increased by one step. If you
press the button again after the highest speed is reached, the device will start
again at the lowest speed level, etc.
Water tank
Highest water level
Lowest water level
