37
EN
Important notes on installation
In cooling mode, the unit must be placed
near a window or an opening so that
the warm exhaust air can be directed
outside. First place the appliance on
a flat floor and ensure that there is a
minimum distance of 45 cm around the
appliance and that it is close to a power
outlet.
•
The device should be placed on a solid foundation to minimise noise and vibrations.
•
Place the unit on a smooth, level floor that is strong enough to support the unit.
•
The unit is equipped with castors to make it easy to set up, but should only be rolled
over smooth, flat surfaces. Use caution when rolling the unit over a carpeted floor.
Be careful and protect the floor when rolling over wooden floors. Do not attempt to
roll the unit over objects.
•
The appliance must be installed near a power outlet.
•
Keep a minimum distance of 45 cm around the appliance and upwards from walls
or other objects.
• Close the windows and doors in the room to be air-conditioned.
•
If you use the unit continuously during the season, leave one door slightly open to
ensure adequate ventilation.
•
Protect the room from direct sunlight by partially closing curtains or blinds to make
the operation of the unit much more economical.
•
Do not place any objects on top of the device.
•
Do not block the air inlet or outlet of the unit. Reduced airflow will result in poor
performance and could damage the unit.
• Make sure that there are no heat sources in the room.
