22
EN
Installation (Vent outside)
Note
: When the range hood and appliance supplied with energy other than
electricity are simultaneously in operation, the negative pressure in the room must be
not exceed 4 Pa (4 x 10
-5
Bar).
1
2
Drill 3 x 8 mm holes to accommodate the
bracket. Screw and tighten the bracket
onto the wall with the screws & screw
plugs provided.
Offer up the cooker hood and hang onto
the wall bracket hook.
3
4
Put the upper chimney into lower
chimney. Then pulling out the upper
chimney upwards. Adjust to reach the
height required.
Screw and tighten the upper and lower
brackets onto the wall with the screws &
screw plugs provided.