29
EN
What?
How?
Important!
Boilovers, melts,
and hot sugary
spills on the
glass
Remove these immediately with
a fish slice, palette knife or
razor blade scraper suitable for
ceramic glass cooktops, but
beware of hot cooking zone
surfaces:
1.
Switch the power to the
cooktop off at the wall.
2. Hold the blade or utensil at
a 30° angle and scrape the
soiling or spill to a cool area
of the cooktop.
3.
Clean the soiling or spill up
with a dish cloth or paper
towel.
4. Follow steps 2 to 4 for
‘Everyday soiling on glass’
above.
•
Remove stains left by
melts and sugary food
or spillovers as soon as
possible. If left to cool on
the glass, they may be
difficult to remove or even
permanently damage the
glass surface.
• Cut hazard: when the
safety cover is retracted,
the blade in a scraper
is razor-sharp. Use with
extreme care and always
store safely and out of
reach of children.
TROUBLESHOOTING
Code
Possible Cause
Solution
E0
Wrong pot.
Use a suitable pot.
E1
Circuit malfunction.
Contact a professional.
E2
Problem with the temperature sensor.
Contact a professional.
E3
Surge (more than 275 V).
Check the power circuit and find a
suitable power supply.
E4
Undervoltage (less than 100 W).
Check the power circuit and find a
suitable power supply.
E5
Overheating of the pot bottom.
Let the appliance cool down.
E6
The airflow has been interrupted.
Check the airflow vents and
clean them from the outside. If
the problem persists, contact a
professional.
