24
EN
TROUBLESHOOTING
Problem
Possible Cause
Possible Solution
Cooling does
not work, the
cooling system
on back of the
refrigerator is
cool.
a) T
he red point of the knob of
thermostat is set “0”.
a)
Set the red point of the knob
of thermostat to the middle
position
.
b) The power plug was not
plugged in.
b) Put the plug in.
c) There is no power in the
socket.
c) Check the power cord,
have the socket and power
lines checked by a qualified
technician, or use a different
socket.
d) There are problems with
electronic parts or sensors.
d) If necessary, have electronic
parts and sensors checked and
replaced by the manufacturer or
a qualified technician.
e) The heater does not function
properly or is damaged.
e) If necessary, have the
heater bar replaced by the
manufacturer or a qualified
technician.
Note on replacement:
Unplug the plug,
lift the
insulated tube 30 to 40 mm
untill you see the clip for the
heater bar and loosen the
heater bar.
Put the insulated tube to
its original position after
replacement.
f) The refrigerator is at defrost.
f) Read the instructions for
automatic defrosting in the
„Operation“ section of this
manual.
g) The refrigerator is not
positioned correctly.
g) Turn the refrigerator 9
0
°
to
the front.
