Klarstein 10032354, Operation And Installation Instructions Manual, Page: 15 / 20

15
EN
ASSEMBLY
Main unit assembling
Connect the handle and the body.Screwed
with the set screw.
Assembling the vacuum cleaner
Motor brush assembling
Charge base assembling
Fit the motor brush with the body until it
clicks into the position.
Remove the motor brush
Press the knob and remove the brush from
the body.
Fit the back into the charge base.
Remove the back from the charge base.
Remove the back from the charge base
Press the knob at the bottom of the base,
and pull out the back.