Klarstein 10032195, Manual

Page: 23 / 74

23
EN
INSTALLATION
To turn the door
Required tools:
Flat screwdriver, Phillips screwdriver, hexagon spanner.
• Make sure the power is off.
• Tilt the unit back slightly and lean it against a solid wall.
• Keep all parts in a safe place until the unit is installed again.
•
Do not place the unit on the floor as this may damage the cooling circuit.
• Have a second person help you remove the doors and reinstall the unit.
1 2 3
Carefully remove the top
cover. Loosen the suspension
with a Phillips
screwdriver. Remove the cover on the
other side with the flat
screwdriver.