Klarstein 10032062, Manual

Page: 14 / 32

14
EN
INSTALLATION
Free standing
Open packaging to take out the body, confirm the product is in good condition
Fix the wheels and base as the below pictures.
Castor assembly Fix the castors to the
base. Fix the shell to base.
Wall mounting
When you need to install it on the wall,
please take away the holder
Make sure the distance can meet the
requirements as picture on the right.
Drill three holes – (A), (B), (C or D) - in the
wall, and make the diameter of hole as 6
mm, depth as 30 mm. The distance can meet
the requirements as Pic.
• Fix the rubber plug into the three holes
• Fix the screws into the rubber plugs
(hole A & hole B). Make the length of
outside screws as 5 mm, to hang the
heater
• Install the bracket on the heater as
picture on the right. Insert a screw into
the hole of the bracket.