17
EN
OPERATION
Before first Use
•
During transportation, the incline angle of the cabinet should not be over 45°.
Do not turn the ice maker upside down. As this may damage the compressor and
sealed system.
•
Remove all packing material and carefully check your ice maker to ensure it is in
good condition and that there is no damage to the ice maker or power cord and
plug.
•
The ice maker should be placed horizontally on a level surface. To ensure proper
ventilation for your ice maker allow 150 mm of space at the top, the back and on each
side. Do not install the ice maker near an oven, radiator, or any other heat source.
•
Before using the ice maker for the first time, please wait 2 hours after positioning it,
and keep the front lid open for at least 2 hours
• Ensure that the voltage indicated on the ice maker corresponds with the voltage in
your home.
• Pure water is not allowed to be used on this unit, spring water is recommended.
Control Panel and Buttons
Press it to turn unit on.
Press it to turn unit off.
Ice size selection,The default setting is medium
L
Big size indicator,when this light is on, indicating that the unit is making big
size ice cubes
M
Medium size indicator,when this light is on, indicating that the unit is making
medium size ice cubes
S
Small size indicator,when this light is on, indicating that the unit is making big
small ice cubes
Ice full indicator,when the Ice Storage basket is full, the indicator will light
up,unit stops and enter into the standby status.
Lack of water indicator, if the water volume is too low, this indicator will be on.
The ice maker will stop working automatically.