24
EN
TROUBLESHOOTING
Problem
Possible cause
Solution
The device does not run.
The plug is not plugged in.
Plug the plug in.
The device is switched off.
Switch the device on.
The fuse has been bumped
or is broken.
Check the fuse.
The device does not cool
enough.
The environment requires
a different temperature
setting.
Adjust the temperature
using the control panel.
The door has been
opened too often.
Open the door as seldom
as possible.
The door does not close
properly.
Check the door gasket.
The gasket does not seal
properly.
Check the door gasket.
The cooler / compressor
constantly turns on and
off.
The room temperature is
higher than usual.
Adjust the temperature.
The cooler has been
loaded too full.
Wait until the desired
temperature has been set.
The door has been
opened too often.
Open the door as seldom
as possible.
The door does not close
properly.
Check the door gasket.
The gasket does not seal
properly.
Check the door gasket.
The light does not work.
The plug is not plugged in.
Connect the device.
The fuse has been bumped
or is broken.
Check the fuse.
The light is switched off.
Switch the light on.