18
EN
USE AND OPERATION
CAUTION
Risk of burns! The temperature of accessible surfaces may be high
when the appliance is operating. This appliance is liable to get hot
during use. Do not touch hot surfaces.
Turn on the device
• Place suitable cooking utensils in the center of the hotplate and plug in.
•
Press On/Off button and the LED indicator lights up in [---]. If the Menu button
is not pressed with in a minute, the cooker returns to standby mode.
Select the cooking zone
•
Press the Zone button and the LED indicator displays [9]. The induction cooker
enters Flex Induction mode. The cooker heats at default power level 9. Press
the [+] or [-] button to select desired heating power between level 9 to 1.
•
Press the Zone button to enter dual hob mode. The LED displays [99]. When
the relevant 9 fl ashes, press [+] or [-] to select desired heating power between
level 9 to 1.
MAX button
•
Press Max button once, the L LED at the top of the button lights up. L Zone,
the left hotplate, outputs with maximum power. [+] or [-] buttons cannot be
operated, R Zone stops heating.
•
Press Max button twice, the R LED at the top of the button lights up. R Zone,
the right hotplate, outputs with maximum power. [+] or [-] buttons cannot be
operated, L Zone stops heating.
• Press Max button thrice, the indicator extinguishes. The cooker enters Flex
Induction mode. The cooker heats in the default power at level 9. Press the [+]
or [-] button to select the desired power between level 9 to 1.
Timer
Press the Timer button and the Timer indicator fl ashes. Timer can be set between
0-180 mins, at a step of 5 min per press. When the Timer button is pressed,
the LED displays 0, the induction cooker enters Timer mode. Press [+] or [-] to
adjusts the timer between 0 to 180 minutes. After fi ve seconds, the display will
automatically shift to display the corresponding function. If countdown function is
needed, press Timer button again, the display displays the countdown time.
Memory function:
The induction cooker’s timer has a memory function.
Operating under the timer function, if the operating mode has been changed to
another, and then another, the fi nal operating mode will be timed according to the
original time setting.
