22
EN
OPERATION
Lighting and colors
• The illumination changes according
to the speed you set: Red >
Yellow > Blue.
• While the device is in operation,
this part is continuously illuminated
in white.
Functions and operation
• Touch the key once to make the lamp come on.
• Press and hold the key for 2 seconds. The motor starts and runs at low speed while
the light comes on.
• Press the key briefly to switch to medium speed, the light stays on.
• Press the key briefly to switch to high speed, the illumination remains on.
• If you press the key again, switch back to low speed.
• Press and hold the button for 2 seconds during any operating mode to turn off the
lamp and motor.
CLEANING AND MAINTENANCE
• Always unplug the unit from the wall outlet first before cleaning.
• To maintain the housing, clean it every two months with a little hot water and a mild
detergent.
• Do not use chemical cleaners or abrasive cleaners for cleaning.
• Make sure that no water enters the motor or other parts of the device so that the
electronics are not damaged.
• The activated charcoal filter must not be exposed to great heat.
• Do not open the frame of the activated charcoal filter.
• If the power cord or plug are damaged, they must be replaced by the
manufacturer, an authorized specialist company or a similarly qualified person.