9
Problem
Possible Cause
Solution
Device does not work,
ICE FULL light comes
on.
Ice full occur.
Remove th ice cubes from basket.
Ambient temperature is
below 6°C.
Keep the ambient temperature above 7°C, then restart
the unit.
Device does not work,
ICE FULL and FAULT
flash together.
ICE FULL sensor is de-
maged or not connected.
Contact a service agency for repair or replacement.
Device does not work,
FAULT light flashes.
Condenser sensor dema-
ged or does not run.
Contact a service agency for repair or replacement.
WATER LOW and ICE
FULL flash together
or the FAULT flash
rapidly.
Refrigerant leakage.
Contact a service agency for check or replacement.
Compressor does not
run.
Compressor demaged or ambient temperature is above
43°C.
Ambient temoperature is
below 6°C.
Keep the ambient temperature above 7°C, then restart
the unit.
FAULT, WATER LOW,
ICE FULL three lights
flash slowly.
The hall sensor is not
in correct position or
damaged.
Contact a service agency for adjustment or replace-
ment.
Paddle motor damaged. Contact a service agency for replacement.
Hints on Disposal
According to the European waste regulation 2002/96/EC this symbol on the product
or on its packaging indicates that this product may not be treated as household waste.
Instead it should be taken to the appropriate collection point for the recycling of electrical
and electronic equipment. By ensuring this product is disposed of correctly, you will help
prevent potential negative consequences for the environment and human health, which
could otherwise be caused by inappropriate waste handling of this product. For more de-
tailed information about recycling of this product, please contact your local council or your
household waste disposal service.
Declaration of Conformity
Producer
: Chal-Tec GmbH, Wallstraße 16, 10179 Berlin, Germany.
This product is conform to the following European Directives:
2014/30/EU (EMC)
2014/35/EU (LVD)
2011/65/EU (RoHS)
2009/643/EU (ErP)
