19
EN
OPERATION
Before you set the device into operation for the first time, connect the hood to the
power supply (mind the general security guidelines).
1
Fan
ON/OFF
Touch the button to start ventilation. By touching
this button again you change to 3 different
ventilation speeds.
„F1“ Low level
„F2“ Middle level
„F3“ High level
2
Light
Touch this button to switch the light on or off.
3
Setting the clock
Setting the delayed
off
In standby-mode you can set the clock. Do not
touch any other button 10 seconds before this one.
4
Moving the damper
In operation mode you can set the delayed off. In
standby-mode touch this button for 3 seconds in
order to move the damper up or down. Thus you
can reach all surfaces for cleaning.
5
Delayed off
Touch this button in order to run the ventilator
for the set time. By pressing this button again you
leave the delayed off mode and the device shuts
down.
Before you can use the
remote conntrol you have
to remove the protective
film.