6
Instruction
● Energy-saving, high velocity motor for maximum air circulation
● Tilt-adjustment for flexible use
● Triple speed selection
● Precision fan blades for powerful wind but low-noise
● Chrome-stand, solid construction with thermal-protection to prevent motor overheat.
INSTRUCTION FOR INSTALLING
WARNING:
IF THE SUPPLY CORD IS DAMAGED, MUST BE REPLACED BY THE MANUFACTURER OR ITS
SERVICE AGENT OR SIMILAR QUALIFIED PERSON IN ORDER TO AVOID THE HAZARD.
BE SURE TO SHUT OFF ELECTRIC SUPPLY AT MAIN SWITCH OR CIRCUIT BREAKER BEFORE INSTALLA-
TION.
THE IMPORTANT SAFEGUARDS AND INSTRUCTION APPEARING IN THIS MANUAL ARE NOT MEANT TO
COVER ALL POSSIBLE CONDITIONS AND SITUATION THAT MAY OCCUR.IT MUST BE UNDERSTOOD THAT
COMMON SENSE, CAUTION AND CARE ARE FACTORS WHICH CANNOT BE BUILT INTO ANY PROCDUCT.
THESE FACTORS MUST BE SUPPLIED BY THE PERSON(S) CARING FOR AND OPERATING THE UNIT.
NO RESPONSIBILITY WILL BE ACCEPTED FOR ANY DAMAGE WHICH MAY OCCUR DURING TRANSPORT
OR BY IMPROPER INSTALLATION OR VOLTAGE FLUCTUATION OR IF ANY PORTION OF THE PRODCT HAS
BEEN ALTERED OR MODIFIED.
Safety Instructions:
1. This appliance is not intended for use by persons (including children) with reduced physical,
sensory or mental capabilities, or lack of experience and knowledge, unless they have been given
supervision or instruction concerning use of the appliance by a person responsible for their safety.
2. Children should be supervised to ensure that they do not play with the appliance.
3. If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly
qualified persons in order to avoid a hazard.
4. Improper installation may result in the risk of fire, electric shock, or injury to persons.
5. To present risk of fire and electric shock, do not use the unit near windows.
6. The fan should be placed on a flat and stable surface when operating to avoid overturning.
7. The fan should not be placed in a damp place or where humidity is high (such as in a bathroom).
Explode view
1. Front Guard
2. Blade
3. Screw
4. Motor
5. Nut
6. Plastic washer
7. Bolt
8. Rear Guard
9. Nut
10. Stand
11. Screw
12. Power supply cord
13. Switch box
14. Nut
15. Screw
