6
7
Main parts
1.Loading handle
2.Cancel Button
3.Reheat Button
4.Defrost Button
5.Browning Control
6.Toasting Slots
7.Cumb Tray
8.Metal plate
USAGE
1. Ensure the toaster is connected to mains supply and switched ON.
2. Place one or two slices of bread into the toasting slots and press down the loading handle until it
latches.
3. The toaster will heat up automatically and start toasting.
4. Adjust the browning control to achieve the amount of toasting desired.
5. To stop toasting press the CANCEL button at any time.
6. Lift the loading handle to check the bread during toasting.
7. When toasting is fi nished the loading handle will rise automatically. The toast can then be safely
removed.
8. If the toast is not dark enough, you may wish to toast the bread again.
Browning Control
The browning control enables adjustment of toasting time, this is adjustable from 1 to 6.
• 1-2 for light toasting
• 3-4 for medium toasting
• 5-6 for dark toasting
Reheat Function
Your toaster can re-heat toast if it has cooled too quickly. To do so press the Reheat-Button and push the
loading handle down.
Defrost Function
Your toaster can defrost frozen bread before toasting if required.
• Place the bread into the toaster.
• Set the browning control to required setting.
• Press the loading handle down
• Press the defrost button, the defrost indicator will light up. Ensure toast does not burn.
Cancel Function
• Press the CANCEL button if bread starts to smoke.
CARE, MAINTENANCE AND CLEANING
Cleaning
1. Switch OFF mains supply and allow toaster to cool completely before cleaning.
2. Only clean the surfaces of the toaster with a soft damp cloth.
3. Do not allow crumbs to build up inside the toaster.
4. Crumbs can be removed by pulling out the crumb tray, located at the end of the toaster, and
clearing any build up with damp cloth.
5. Internal parts can be easily damaged. Do not touch the internal parts of the toaster with any
implement.
CHAL-TEC Vertriebs- + Handels GmbH; Wallstraße 16; 10179 Berlin
