4. Introduction of Display Plate Function.
POWER
Controls the ON/OFF of the whole system.
℃
/
℉
This button switches from Fahrenheit to Celsius.
Light ON/OFF
Control the ON/OFF of LED light
▲
Press this key to adjust the incremental set of temperature
▼
Press this key to adjust the reduced set of temperature
RUN
LED light will illustrate when the compressor is operating.
SET CHAMBER
Digital display of preset temperature
CHAMBER
Digital display of inner cabinet temperature
The control of cool circle system
The compressor will stop working when the cooling system in the cabinet reaches the presetting temperature,
and re-start working until the desired temperature is achieved. Allow a minimum 5 minute interval before
re-starting.
Layout and Storage of Wine
Different way of layout:
Fixed wooden shelf: capacity: 11 bottles / shelf
Sliding shelf: capacity: 8 bottles / shelf
Max weight: 75 kg
Max weight: 20 kg
No more than 6 bottle of wine every shelf
Maintain a minimum 20mm between bottle and back plate
Read the following carefully if change the position of shelf:
To move a sliding shelf, first remove all bottles, and then remove the sliding shelf by sliding guides from
walls, while making sure not to mix up the right and left guides
Installation diagram of Sliding shelf:
SHELF
BRACKET
WALL
10