Klark Teknik HELIX SYSTEM DN9340, Operator'S Manual

Page: 25 / 62

l
abc
17
Operation DN9340:
Home page
The home page is accessed from any of the EQ pages by pressing the HOME(SETUP) key once. In the setup
menu the HOME(SETUP) key is pressed repeatedly to move through the menus, and after the last menu entry
returns to the home page.
On the home page, the large display shows the overall system response. Along the top edge is the name of the
current working memory, the in/out status (bypass) of each type of EQ and the unit name. The alphanumeric
display shows the unit name and the name of the current working memory. On the home page, the bypass key
will bypass all processing for the selected channel (A, B or both if linked for stereo in the setup menu).
Home page sub-menus
This menu provides controls for the overall delay of the system and the input gain trim.
The delay is set in increments of 20.83uS (1 sample at 48kHz sample rate) and is displayed in
time units by default. Alternatively the display can be selected to show distance in either Metric
or Imperial units. Details of changing the units are found in the Setup menu section on page 27.
The input gain control has a range of -40dB to +12dB in 0.1dB steps, and also provides an “off”
position which mutes the input signal.
Press HOME(SETUP) to return to home page.