Klark Teknik HELIX DN9340E, Operator'S Manual

Page: 65 / 78

Set Up Menu: DN9344E
55
To change the IP Address Mode
1
With the DN9344E connected to your network, step through the Set Up menus to the ‘IP ADD’
setup page shown below:
2
Use the
UP
and
DOWN
buttons on the right-hand half of the unit (Section 2) to change between
the three available options.
3
Press
SETUP
to confirm (unit will display password menu).
4
Press
SETUP
to exit.
15.6.2 IP Address (Page 8)
This page displays the currently stored IP Address for the DN9344E unit:
If Auto IP or DCHP have been selected
The display is read-only and cannot be modified by the user.
If Manual mode has been selected
1
Use the
UP
and
DOWN
buttons on the left-hand half of the unit (Section 1) to navigate between
each of the four display fields.
2
Now use the UP and DOWN buttons on the right-hand half of the unit (Section 2) to set a value
between 0-255.
3
Press
SETUP
to confirm (unit will display password menu).
4
Press
SETUP
to exit.
Note
It is important that all units and the controlling PC have a unique IP
Address in order for the network to function correctly.