RECALL
ST
ORE
12
Description of Function Blocks and Parameters
The following pages provide the user with descriptions of all function blocks that can appear in any
selected mode, including all available parameters, value ranges and default settings.
In EDIT mode, the input/channel identification is indicated in the top left corner of the display while the
function block name (MASTER EQ, MASTER DELAY, CHANNEL EQ, ROUTING, etc…) is shown
next to it.
The corresponding parameters for each function block appear in the second and third line of the display.
The system function blocks are accessed using the rotary PARAMETER encoder in the following menu
sequence:-
INA:MASTER EQ1
INA:MASTER EQ2
INA:MASTER EQ3
INA:MASTER EQ4
INA:MASTER EQ5
INA:MASTER EQ6
INA:MASTER EQ7
INA:MASTER DELAY
IN B:MASTER EQ1
IN B:MASTER EQ2
IN B:MASTER EQ3
IN B:MASTER EQ4
IN B:MASTER EQ5
IN B:MASTER EQ6
IN B:MASTER EQ7
IN B:MASTER DELAY
INA+B:MASTER DELAY
OUT1:ROUTING
OUT1:CHANNELEQ1
OUT1:CHANNELEQ2
OUT1:CHANNELEQ3
OUT1:CHANNELEQ4
OUT1:CHANNELEQ5
OUT1:CHANNELEQ6
OUT1:HIPASS XOVER
OUT1:LOPASS XOVER
OUT1:CHANNELDELAY
OUT1:COMPRESSOR
OUT1:LIMITER
OUT1:LEVEL
Access to function blocks
