Klark Teknik DN530, Operator'S Manual

Page: 45 / 56

DN530
Operator Manual
33
Appendix B: Technical Specification
This appendix contains the technical specifications specific to the DN530.
Inputs Four
Type
Impedance
Maximum input level
Common mode rejection
Analogue, electronically balanced
female XLRs (Pin 2 hot)
10k ohms
+22dBu
Typically, -80dB at 1kHz
Outputs Four
Type
Output impedance
Maximum output level
Signal drive capability
Analogue, electronically balanced
male XLRs (Pin 2 hot)
<60 ohms
+22dBu
<600 ohms
External
sidechain
inputs Four
Type
Impedance
Maximum input level
Common mode rejection
Analogue, electronically balanced
Jack sockets
20k ohms
+22dBu
Typically -60dB at 1kHz
Solo bus input One
Type
Input impedance
Maximum input level
Common mode rejection
Analogue, electronically balanced
female XLR (pin 2 hot)
20k ohms
+22dBu
Typically -60dB at 1kHz
Solo bus
output One
Type
Output impedance
Maximum output level
Signal drive capability
Analogue, electronically balanced
male XLR (pin 2 hot)
<60 ohms
+22dBu
<600 ohms
Performance Maximum gate gain
reduction
Maximum accent gain
Maximum signal level any
input or output
Noise at main output with
unity gain
Distortion at 1KHz 0dBu
with steady unity gain
condition
Signal delay
Frequency response
Dynamic range
Greater than -90dB
+12dB
+22dBu
-94dBu
<0.05%
0 seconds
±0.5dBu (input to output), 20Hz to
20kHz
>116dB (22Hz to 22kHz unweighted)