Klarity Medical Products, LLC
1987 Coffman Road
Newark, OH 43055
Ph. 740-788-8107
Fax 740-788-8109
Email: [email protected]
Page
5
4
Oven Operation
Digital Controls Initial Start
1.
After the oven is plugged in, press the START button (#9).
2.
Press the (-) button (#8) and set the timer to INF. This will allow the oven to
continuously run. (The timer can be set to a certain number of minutes, however
once the timer goes off, the OVEN WILL SHUT OFF. We recommend an
external digital kitchen timer be used if you want to keep the oven warm by
running it at all times.)
3.
Press SELECT again, so the light by the thermometer symbol (#5) is lit. This is
the temperature setting.
4.
For Klarity™ masks, press the (-) button (#8) and set the temperature for 165
degrees. For other brands of masks, refer to their instruction sheet or call the
company for further instructions.
5.
Check the STEP button (#1). Make sure the light beside setting #1 is lit.
6.
Press START (#9). It will take 5-6 minutes for the oven to reach the set
temperature. To view the temperature reading, touch the SELECT button again.
7.
Follow instruction sheets included with your masks for heating times and usage
information. For Klarity masks, heat up time is 3-4 minutes and the cushion heat
up time is 10-12 minutes.
To use the factory set oven programs:
1.
Press P1-P6
2.
Press START Oven will preheat to programmed temperature.
3.
Oven is ready to use when oven beeps.
4.
Opening and closing the oven door will stop the beep.
5.
Press SELECT to change the display from INF (time) to temperature.
