Page 15
Page 14
11.
Slide the light cover into the top bracket, ensuring that the white side of the cover is facing up (Fig. 23) .
12.
With the wire notch facing down, replace the bottom bracket (Fig. 24) .
13.
Attach the bottom cover bracket, ensuring that the wire is positioned in the wire notch (Fig. 25) .
14.
Fully tighten the screws on the top cover bracket (Fig. 26).
Figure 23
Figure 24
Figure R
15.
Plug the halves of the cord connector back together (Fig. 27) . They will only fit one way .
16.
Replace the inner glass panel by positioning it over the open oven door so that the oval logo on the glass is
facing down in the back left corner . Slide the back edge of the glass into the metal slots at the bottom of the
door (Fig. 28).
17.
Lower the glass until it is resting on the tabs at the top of the door (Fig. 29).
18.
Pull the tabs back until the glass drops into place in the door . Finally, release the tabs to secure the glass in place,
and close the oven door .
Figure 27
Figure 28
Figure 29
