Thank you for purchasing the Klang Clip Tuner SCT-3W Wind Instruments.
Please read this manual carefully before using the product, and operate it in
accordance with this manual. Please save this manual for future reference.
SAFETY INSTRUCTIONS
• The device is not a toy. Keep it out of the reach of children and pets.
• If you have questions which remain unanswered by these operating
instructions, contact us or other technical personnel.
• For cleaning all you need is a dry, soft and clean cloth.
• Do not use any aggressive cleaning agents, rubbing alcohol or other
inflammable, chemical solutions.
• Do not apply excessive force to the switches or controls.
BATTERY USE
• Make sure the polarity is correct when putting in a new battery.
• Remove the battery when the unit is not in use for a longer period of time.
• If the device is not working correctly, remove the battery and put it back in
after 10 seconds.
• Replace the battery if the LCD light becomes weak or unclear.
• Dispose of the old battery properly.
CONTROLS AND DISPLAY
CLIP TUNER SCT-3W
WIND INSTRUMENTS
Display
Battery cover
OPERATION
Push the power button to turn the device on.
To select your desired tuning, push the power button again. By repeatedly
pushing the power button you can select the tuning in the following order:
C, D, Eb, F, Bb. The selected tuning will be shown in the display to the right
below the name of the note. Use the clip to attach the tuner to your instrument
at an adequate position.
If the tuner identifies a note, its name will be shown in the display. Once the
right pitch is reached and the indication needle is in the middle, the display co-
lor will turn green. If the pitch needle is left of the middle, the pitch is to low and
a “b” will be displayed next to the note. If the pitch needle is right of the middle,
the pitch is too high and a “#” will be displayed next to the note.
POWER SAVING
If no operation or no signal is detected for 1 minute, the tuner will turn itself off
automatically.
TECHNICAL DATA
• Tuning: C, D, Eb, F, Bb
• Tuning range: B0 – B7
• A4 calibration: 440 Hz
• Tuning mode: clip
• Tolerance: ± 1 cent
• Power supply: 3 V CR2032 battery
• Includes: 1x SCT-3W, 1x CR2032 battery, 1x manual
DISCLAIMER
Technical specifications and appearance are subject to change without notice.
INFORMATION OBLIGATION FOR THE DISPOSAL OF BATTERIES
According to § 12 par. 1 No. 1-3 BattV (Regulation for the return and disposal
of used batteries and accumulators (BattVO) dated March 27, 1998 (BGBl. I
S. 658)) we as seller inform that the customer as end consumer is obliged to
return used batteries by law. Batteries can be returned free of charge after use
to the seller or to his waste disposal centre in his direct vicinity. If batteries are
sent to the seller, sufficient postage is to be paid. The the symbol of the wheel
bin means that the batteries contain heavy metals and harmful chemicals that
may not be disposed of in household or commercial waste. The abbreviations
under the symbol mean: “Cd” (Cadmium), “Pb” (Lead), “Hg” (Mercury)
DISPOSAL ADVICE FOR EEE-ARTICLES
Our customer is obliged to return the EEE-article after its lifespan separately
from the household or commercial waste. EEE-articles can be returned free of
charge after use to the seller or to his waste disposal centre in his direct vicinity.
session GmbH & Co. KG, Wiesenstraße 2-6, 69190 Walldorf, [email protected]
WEEE-Nr.: DE 14977334
On/off switch
Clip
Accuracy indication
Note indication
Reference frequency
