Congratulations on the recent purchase of your new pedal boat! You have purchased a boat from one of the nations leading
manufacturers of small boats. Your boat represents years of commitment to product design, excellence in engineering and quality in
manufacturing. With proper care and maintenance your pedal boat should last for many years to come. Please call our helpful and
knowledgeable Customer Support Department if you have any questions.
MATERIALS
Your pedal boat is manufactured from High Density Polyethylene (HDPE). It is a very durable material. Our
specially formulated HDPE has an ultra-violet inhibitor blended throughout the material to reduce color fade
and maintain its strength. Polyethylene is a somewhat flexible material with some memory. This means it has a
tendency to return to its original molded shape if distorted. All boats are equipped with closed cell foam for
flotation.
BOAT SET-UP
Rudder
It is necessary for you to change the rudder from its shipping position to the operating position. See Photos #1
and #2. Remove the rudder and pin it through the top hole of the rudder so it hangs with the straight side
towards the front of the boat. Be sure to secure it with cotter ring.
Two adjustable seats come with our Sun Slider Adjustable 5 Seat Lounging Pedal Boat. Adjust the seat to
accommodate your height by placing it in the notched positions. For lounging, simply place seat in the back
footwell notches.
Paperwork
Warranty Registration Card
To properly register your boat with KL Industries for warranty validation please fill out the warranty registration
form online at www.klindustries.com. Please review our full warranty statement. If you are unable to register your
boat online please contact our Customer Support Department at 231-733-2725. The serial number can be found on the outside of
the hull in the back right corner just under the rubrail. See Photo #3.
Photo #1 Shipping
Position
Photo #2 Operating
Position
Photo #3 Serial Number
Location
