10
• Foam grease filters
must be soaked
once a month in warm soapy water for
1 to 2 hours. Do not wring out; repeat
where required and replace the filter
by a new item after a maximum of 5-6
washes.
• Metal grease filters
do not have to be
replaced when they are over-satura-
ted but washed once a month by hand
or in a dishwasher (60°). Allow the
filter to dry thoroughly and carefully
replace it in the extractor hood.
Avoid using alkaline dishwasher
cleaning agents (ph value over 7).
!
4.2 Carbon filters
Traditional carbon filters (normally round
in shape)
can be neither washer nor rege-
nerated. In normal use and depending
on their size, replace every 4 to 6 months.
Comply with the relevant instructions on
the package.
Care and cleaning
Original Carbon filter for
this model:
K102
Make sure that your new lamp
(E14) doesn’t have a higher po-
wer consumption than the ori-
ginal one.
!
Pay attention that the hood is powered
off before changing the lamps.
5. Changing the lamps
