10
Installation
7. Rail guides
Now slide the refrigerator in the closet - caution
so you do not scratch your device.
When connecting the appliance door with door
furniture, follow these steps:
The drag rail guides are at a distance of 120 - 150
mm are mounted from the top or bottom edge of
the door (see illustration). Attach the rail guides
with four ST 4 x 12 screws on the edge of the ap-
pliance door. Press the appliance door and the
furniture door. Insert the tow bar in the guides and
attach the tow bar with ST 4 x 12 screws 25mm from
the edge of the furniture door removed, as shown.
To complete the mounting of the tow bar then re-
move the guides and disconnect the appliance
door and the furniture door. Then screw the other
side of the tow bar firmly and fasten the guides
back in its original position. Close the door and ve
-
rify that the installation is done correctly.
The door
must be completely sealed, the door seal must
not be pinched, etc.
12
0–
15
0
Rail guides
12
0–
15
0
4x ST 4 x 12
25 mm
