- 4 -
LED Indicator Status
LED will light up when you turn the power switch to "ON", and then LED will follow below
behavior.
Power Indicator
(Red LED)
On
Power on
Blinking
N/A
Off
Power off
Blinking
Fast Blinking (0.25s) :
SD Card Full
SD Card
Indicator
(Green LED)
On
System ready and Micro
SD card is working
normal
Blinking
Slow Blinking (1s) :
Recording
Off
Micro SD card is
abnormal or not
working
Blinking
Fast Blinking (0.25s) :
less than 20%
(around)
battery power left
Battery Indicator
(Yellow LED
Device: on)
On
Powering or Battery full
of charge
Slow Blinking (1s) :
more than 20%
(around) battery power
Off
N/A
Battery Indicator
(Yellow LED
Device: off)
On
Powering
Blinking
N/A
Off
Battery full of
charge
How to Charge The Battery
Connect the provided power adapter with the cradle.
The charging time is around
3 hours
and
the green LED will be on. The battery, after fully charged, can last for
6.5 hours
at least under
continuous recording.
However, the battery power will be dramatically reduced when recording
with IR LED especially at night.
Under motion activation or power saving mode, Motion
Activated Tissue Box can last for longer.
NOTE: Under low temperature conditions, the battery will have a shorter life than normal.
NOTE: Please use the bundled power adapter only. Damage which is caused by other
power adapter will be beyond warranty.
NOTE: please re-charge the battery to full when receiving SC1740
NOTE: For better performance it is recommended to charge the battery once every 3 weeks.
