12
Warning
a) Do not apply any voltage to the input when the Meter is
working in contonuity test mode.
b) The open voltage of input terminal is approx. 3V.
c) When the measurement has been completed,
disconnect the connection between the testing leads
and the circuit under test and remove testing leads from
the input terminals.
Temperature Measurement
To measure temperature, connect the Meter as follows:
·
Set the rotary switch to
°C
range and the display is ambient
temperature
.
·
Connect the red lead of temperature probe (k type) into
“mA" input terminal and black lead of it into “V
Ω
” input
terminal..
·
Put the sensor end of the temperature probe into the area
want to measured.
·
Read the value from display.
·
Press HOLD button if need.
Warning
a) Do not apply any voltage to the input when the Meter is
working in temperature measuring mode.
b) It will result additional error if the Meter is placed out of