Kiyo GPS M1, User Manual

Page: 9 / 12

7
c) Signals of the LED status indicator
Continuous green signal:
The device is connected to the GPS satellites and it is ready for use.
Flashing green signal:
The device is connecting to the GPS satellites and it is NOT ready for use.
No signal:
In this case, the device is not powered. Ignite the engine and check the wiring!
The device includes a fuse that will cut off the current in case of a malfunction or a
short wire. If the wiring is correct but the status indicator does not show any sign
30 minutes after the ignition, please contact our customer service.
d) Signals of the LED strip
Short flash:
The device just connected to the GPS satellites.
Continuous light blue signal:
You are in a 500 meters vicinity of a dangerous zone and closing on the speed trap,
but your speed is below the maximum allowed speed. Pay attention to your speed!
Strong, flashing blue signal:
You are in a 500 meters vicinity of a dangerous zone, closing on the speed trap and
your speed is above the maximum allowed speed. Slow down!