17
OPERATION GUIDE
(a) P - Power LED
To turn on the Remote Laser
Detector, put the control panel
into the cigarette lighter socket
of the vehicle. Then the power
LED [P] turns on and the
control panel starts working.
(b) L - Link LED
The [L] LED shows connection
status between the control
panel and the sensors. If it is
correctly connected, the [L]
LED is on.
(c) M – Multi LED
The [M] LED signals all the
activities of the device.
(d) External Sensor Plug Socket
Plug the external sensors’ cable
here.
(e) Multifunctional Button
- Tutorial function
Simulation of receiving a laser
signal. Press it long (for about 3s).
- Warning for sleeping driving
Press it short (for less than 1s).
- Mute
Press it short (for less than 1s)
when receiving laser signal.
(f) Sub Power Cable Socket
Connect the Sub Power Cable
here, if you would like to connect
GPS Detector.
