5
6)
Hardware Installation (by Ethernet)
Getting Start
Graphic illustration
Step-1,
Deploy
Gateway
1.1
Before starting to use gateway,
the power and Ethernet (RJ45 to
network) and antenna need to
be connected well.
1.2
USB cable connect to power
adapter and plug the adapter in
the wall outlet. (power light
should turn green)
1.1
1.2
Step-2
Deploy
603/
604V2
sensors
(optional) Turn on temperature
sensors – “LAS-603”.
2.1 Remove the bottom cover, and
turn on the power.
2.1
2.2 Cover back the bottom cover.
Lock two screws.
2.2
2.3 Methods to fix LAS-603.
1)
By backside 3 magnets of
LAS-603 mounting on
magnetic surface.
2)
By hook (remove 3 magnets)
3)
Use accessory – fixed iron
plate for non-magnetic
surface.
2.2
(optional) Turn on temperature
sensors – “LAS-604V2”.
2.3 Open LAS-604V2’s cover, holding
and pressing two places in red circle.
2.3
