Gateway TLG3901B/BLV2 Series User Manual
V2.0.4
7
December 2020
2.2.
Software Setup
The quick start to using TLG3901B/BLV2 Gateway as follows:
1.
Search wireless SSID with
TLG3901B-
prefix, Figure 2-3, and connect it via laptop. The
default password for connecting wireless is "
tlg3901b
".
2.
Open browser and input
10.42.43.1
at URL.
3.
TLG3901B/BL’s administration portal can be seen in browser, as shown in Figure 2-4.
4.
Enter username and password to login, the default username is "
admin
" and password
is "
admin
".
5.
Go to System
→
Network Configuration to check the IP address of Ethernet and make
sure it can access Internet.
6.
Go to Setup
→
Channel Setup to set up the LoRa concentrator, including receiving fre-
quency, spreading factor. For more detailed refers to section 3.2
Channel Setup
.
7.
Activate your LoRa Nodes and start to send packet.
8.
Go to Status
→
LoRa Receive Log to observing status of receiving LoRa packets.
Figure 2-3 Search Wireless RSSI
Figure 2-4 TLG3901B/BLV2 Login
