14
Communication instruction
Intercom between indoor unit and outdoor unit.
Under standby status,press “Call”of out door unit--Indoor unit will ring--
Show
on screen--Press “OK” key, and show
on the screen, then
can talk with each other.
To call/
monitor
the outdoor unit is to press
,
if show the
on
the screen, which means not able to intercom. Press
again, it will
show
on the screen, which means can intercom with the outdoor unit.
Under intercom state, press
to take photo. Will show
on
screen.
Under intercom state,press
to take video. Will show
on
screen.
Under intercom state,press
to
unlock door
. Will show
on
screen.
Press the upper wheel key of indoor unit on the right side. To adjust the
brightness of screen. Will show
on screen.
Press the middle wheel key of indoor
unit
on the right side. To adjust the
contrast ratio of screen.Will show
on screen.
Press the third wheel key of indoor unit on the right side. To adjust the
volume.Will show
on screen.
If turn on PIR,will automatically take photo or video(require TF card inside),
will show
on screen.
During intercom,show
on indoor unit screen,the below battery
icon
is
for outdoor unit power,it will be red color when low power.
the number stands for different indoor unit.The green lines stands for
intercom signal.
EXIT
↓
↑
MENU
EXIT
