KIVOS KDB02, User Manual, Page: 9 / 14

Strona 9 z 14 rev. 1.0.1
USER MANUAL : KIVOS KDB02 VIDEO PEEPHOLE VIEWER
www.elmic.pl , elmic@elmic.pl
Basic functions:
1. Night-Vision
With Night-vision, even under the environment of extremely poor visibility, the system can automatically activate the
infrared lamp and take photo or record video of the objects or people within the distance of 1.5 meter; it displays black
and white effect under the environment of completely dark.
2. Storage card
This product use T-flash card as external storage device, when there is no storage card in the product, the photo-taking
and video-recording functions are unrealizable.
If a self-provided storage card is used:

Up to 32G storage card is supportable.

Before the initial use, carry out initialization with the “Menu”/”Formatted Storage Card” of this product.

This machine has automatic cyclic storage function, when the storage card is full, the original file will be
overwritten.
Attention: do not distort, extrude or strike the storage card, otherwise, the audio-video material recorded on it may be
damaged.
3. Doorbell Settings
4. Doorbell switch
When the host machine with battery installed is inserted in the host machine holder, the doorbell automatically electrifies
and activates. Press down the outdoor doorbell key, the indoor bell rings and the outdoor scene is displayed, meanwhile it
will automatically take photos and record video, and then shut down.
Remove the host machine if you need to shut down the doorbell.
5. View and record of outdoor scene
Auto Mode
Short press “ OK ” key, it displays the outdoor scene and automatically takes photos or records video, and then shut down
(set in accordance with the start mode)
Manual Mode
Long press “ OK ” key to view the outdoor scene, press down Upper or Down key to digitally zoom in and out by eight times.
Successively press down “ Func ” key to set Photo ( )/Video ( )/Playback ( ) mode, the corresponding icon will appear on the
right upper corner of the screen.
If the recording mode is “Photo”, press down “
OK ” key to save one photo.
If the recording mode is “Video”, it starts recording and display the time length at every time when you press down the “ OK ” key, and
press down the “ OK ” key again to stop it. .
If there is no operation within two minutes under the “ View ” status, the doorbell enters the standby status.
Press down the Ringing Selection key on the side host
machine to select a proper music as the ringing.
If there is no operation within three seconds after the
ringing is adjusted, the system will automatically save
the currently set ringing.