![Kitsound XDOCK3 User Manual Download Page 7](http://html1.mh-extra.com/html/kitsound/xdock3/xdock3_user-manual_1974010007.webp)
12
13
[...continued]
Playing music
FM radio
For the best FM radio clarity, fully extend the wire antenna (8) located on the rear of the XDock3. It is important not to alter,
obstruct or attach other antennas to this wire antenna.
To use the FM radio:
1. If the XDock3 is in standby mode, press the Power/Mode button (1)
2. Press the Power/Mode button (1) up to 2 more times to change to FM radio mode
3. To manually tune the frequency, keep pressing (not holding) the Up (6) or Down (5) buttons
4. To automatically scan for the next station, press and hold Up (6) or Down (5) until the numbers start scrolling for the next station
You can also save stations to a preset to save scanning for them every time. To do this:
1. Tune into a station you want to save into a preset
2. Press and hold the Menu button (2) until the MEM icon is flashing along with ‘ch’ and a number between 1 to 10
3. To change the preset number, press Up (6) or Down (5)
4. Press the Menu button (2) to confirm the preset number
5. Repeat steps 1 – 4 to save up to 10 stations in total
To recall a preset:
1. Press (don’t hold) the Menu button (2) and the MEM icon will appear along with ‘ch’ and a number between 1 to 10
2. To change the preset number, press Up (6) or Down (5)
3. Press the Menu button (2) to confirm and listen to the station set to that preset number
Care for your XDock3
Please DOn’T
– Get the XDock3 wet
– Drop the XDock3 as this will invalidate your warranty
– Open up the XDock3 as there are no user serviceable parts inside
– Use any other mains adapter than the one supplied
– Expose the XDock3 to extreme temperatures or rapid changes of hot to cold or vice versa
Please DO
– Clean the XDock3 with a soft dry cloth and no detergents
Specifications
Dock connector
Lightning
Alarms
2
Snooze time
9 mins
Frequency response
70 Hz – 18 kHz
Backup battery
2 x AAA