10
11
Instructions for use
Charging the battery
The Sonar has a built-in rechargeable lithium battery. Make sure the
Sonar is switched off. Open the protective rubber cover and connect one
end of the micro USB charge cable to the micro USB charge port (9) on
the Sonar and connect the other end to your PC or USB mains adaptor.
The battery will start charging.
•
It takes up to 3.5 hours to fully charge the battery
•
Whilst charging, the LED indicator (8) will be solid orange
•
When fully charged, the LED indicator (8) will turn solid blue
Bluetooth setup
Pairing a Bluetooth device for the first time
Pairing with nFC
If your device has NFC, you can simplify the pairing process.
To pair to the Sonar via NFC:
1. With the Sonar turned off, slide the ON/OFF switch (10) to the
ON position
2. Wait for 8 seconds and the LED indicator (8) will flash blue
3. Activate the Bluetooth and the NFC features on your device
(check your device’s manual if you’re unsure how to do this)
4. Place your phone on top of the NFC area (11) and a prompt should
appear saying ‘Pair with Bluetooth device KS SONAR’ (or similar)
5. Press ‘Yes’ and your device will then pair and connect to the Sonar
note:
If your device is NFC enabled and it is not picking up the Sonar,
try moving the device around until the NFC is picked up. If you’re using
a case on your device, this may obstruct the NFC from working.
[continued...]
