4
5
Pairing a wireless device
1. Hold the MFB (4) down for 3 seconds. You will see the LED indicator (2)
flash blue and red and enter pairing mode
2. Turn on your iOS, Android, or Windows device’s Bluetooth ON and
search for new devices
3. Select ‘KS Slammers’ from the list of found devices. If asked for a
passcode, enter ‘0000’ or ‘1234’ and the headphones will then be
connected to your device
4. After pairing successfully, the LED indicator (2) will have a flashing
blue light; you can then answer the phone or listen to your music
5. The next time you switch the headphones on; they will automatically
search for and attempt to connect to the last paired device
Note:
‘Bluetooth’ is a trademark of Bluetooth SIG, Inc. This product is
in no way affiliated or endorsed by Bluetooth SIG Inc.
Re-pairing or pairing new devices
1. Make sure you have turned off the wireless connectivity on any
previously paired devices
2. Follow the ‘Pairing a wireless device’ instructions from step 1
Call handling
Answer a call
Press MFB (4) to answer. You can increase the
volume by using (1) or Volume– (3)
Reject a call
Hold MFB (4) to reject the incoming call
End call
Press MFB (4) while in the call to end it
Re-dial
Press MFB (4) twice in quick succession to redial
the last phone number you called on your device